NOTICE!
Correct and proper use
Damage to the product or its sur‐
roundings
– The unit is not intended to
measure or regulate gaseous
or solid media
–
The unit may only be used in
accordance with the technical
details and specifications pro‐
vided in these operating
instructions and in the oper‐
ating instructions for the indi‐
vidual components
NOTICE!
Correct sensor operation
Damage to the product or its sur‐
roundings
– Correct measuring and control
is only possible if the sensor is
working perfectly
–
Check and calibrate the
sensor regularly
2.2 Correct and proper use
NOTICE!
Correct and proper use
The device is designed to
measure the turbidity of water.
The unit may only be used in
accordance with the technical
details and specifications provided
in this operating manual and in
the operating manuals for the indi‐
vidual components (such as, for
example, controllers, sensors, fit‐
tings, calibration devices,
metering pumps, etc.).
Any other uses or modifications
are prohibited.
Safety and responsibility
11
To Next Page
Loading...
Need help?
General
