Ultrasonic cleaning (models TUC 3 and TUC 4)
Error message in the event of incorrect cuvette
Only active if a corresponding cuvette with ultrasound transducer is used. If
you use a cuvette without an ultrasound transducer, then an error message
will be shown on the LCD display.
Fig. 19: Ultrasonic cleaning
Function Options Info
Ultrasonic cleaning
(CLN)
[ON]
(On)
[OFF]
(Off)
Factory setting:
[ON]
Switching the ultrasonic
cleaning function on and
off
If the ultrasonic cleaning function is working normally
„AUTO“
flashes in auto‐
matic measuring mode (AUTO)
Commissioning
49
To Next Page
Loading...
Need help?
General
