ProMinent DULCOTEST - 1.3 Nameplate; 1.4 Scope of delivery

1.3 Nameplate
The cell constant K is needed for calibration on the transmitter/controller.
A2637
Fig. 4: ICT5 nameplate
A2638
Fig. 5: ICT5-IMA nameplate
1.4 Scope of delivery
Scope of delivery of sensor type ICT 5:
n Sensor type ICT 5, order number 1095248
n Straight solvent union PVC for adaptation
of the sensor to a standard T-piece DN40,
PVC (T-piece not included in the scope of
delivery)
n Assembly and operating instructions
Scope of delivery of sensor type ICT 5-IMA:
n Sensor type ICT 5-IMA, order number
1095249
n Assembly and operating instructions
Introduction
12