ProMinent DULCOMETER DMT Series - User Manual

ProMinent
®
Part no. 987426 ProMinent Dosiertechnik GmbH · 69123 Heidelberg · Germany BA DM 163 03/08 GB
Please read the operating instructions through completely before
commissioning this equipment! Do not discard!
The operator shall be liable for any damage caused by installation or operating errors!
Operating Instructions
DULCOMETER
®
DMT
On-site measurement transducer
Measured variables pH/redox/temperature
Please enter the identity code of the device here.
DMTa
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
BA_DM_163_03_08_GB.p65 26.03.2008, 10:20 Uhr1

Summary

Safety

Correct Use

Safety Guidelines

Essential safety precautions for operating the device.

Assembly and Installation

Mechanical Assembly

Instructions for physically mounting the DMT device on walls, pipes, or panels.

Electrical Installation

Procedures for the device's electrical connections and wiring.

Device Overview and Control Elements

Function Description

DMT Settings

Parameters: Temperature

Parameter Output

Measured Variable: Temperature Settings

Operating the DMT

pH Meter Calibration

Step-by-step guide for calibrating the pH measurement function.

Calibration Process

Detailed procedures for performing device calibration, including 1 and 2 point methods.

Troubleshooting

Error Messages During Operation

Error Messages During pH Calibration

Technical Data

Terminal Connection Plan

Wiring Example - Two Wire System

PROFIBUS Circuit Board Terminal Connection

ProMinent DULCOMETER DMT Series Specifications