Promise Technology Vess A Series Quick Start Guide

tAsk 4: MAnAgeMent connection
The Vess A6120 can be remotely managed through the IP network. The
physical connection for management is provided by connecting to either
of the two 1000BASE-T ports on the installed NIC. Alternatively you can
attach a monitor to the VGA, and connect a USB keyboard and manage
the initial setup conguration via direct connection to the device, using the
Command Line Interface. This Quick Start Guide describes only the second
option, connecting to the device with a monitor and keyboard. For remote
management through the surveillance and data network, please see the
Product Manual.
ManageMent Path - on site keyboard and Monitor
Use a USB keyboard and a VGA monitor to establish a direct out-of-band
connection to the management software. The VGA and USB ports are located
on the back of the Vess A6120. Connect a VGA monitor to the appropriate
video monitor port, and connect a USB keyboard to any USB port on the rear
panel.
Management via direct attached keyboard and monitor is done with the
command line interface (CLI). Please see the Product Manual for a list of
commands, use and login information.
Vess A6120 rear panel video monitor connecons and USB ports
VGA port
Connect to
VGA monitor
USB ports
Two USB 3.0 ports; connect to keyboard
1000BASE-T
2 port NIC
Use these ports for system management via IP network
11
Vess A6120 Storage Server Appliance

Promise Technology Vess A Series Specifications

General

Brand	Promise Technology
Model	Vess A Series
Category	Network Hardware
Language	English