Need help?Do you have a question about the Promise Technology SmartStor NS2300N and is the answer not in the manual?
General| Model | SmartStor NS2300N |
|---|---|
| Type | Network Attached Storage (NAS) |
| Drive Bays | 2 |
| USB Ports | 2 x USB 2.0 |
| Operating System | Linux-based |
| Hard Drives Supported | 3.5" SATA I/II |
| Supported RAID Levels | RAID 0, RAID 1, JBOD |
| Network Interface | Gigabit Ethernet |
| Protocols | CIFS, FTP, HTTP, NFS |
| Power Consumption | 30W |
| Compatible Drive Types | 3.5" SATA HDD |
| Cooling System | Active cooling with fan |
| Included Accessories | Ethernet cable, Power adapter |
Details the procedure for installing SATA disk drives into the enclosure.
Guides through the installation process of the SmartNAVI software on a PC.
Guides on mapping a SmartStor folder as a network drive in Windows.
Steps to create a new user account for accessing SmartStor resources.
Guides on setting up and adding drives to RAID volumes.
How to initiate backups and set up automated backup tasks.
Guides on recovering data from previously created backups.
Steps to create new folders and access shared folders.
Guides on setting up the NAS system using wizards.
How to modify network parameters like IP address and name.
Using the wizard to configure the SmartStor via PASM.
Steps to create, modify, and remove user accounts and groups.
Procedures for setting up, modifying, and removing RAID volumes.
How to configure network parameters like IP address and name.
Instructions for updating the SmartStor's system firmware.
Step-by-step guide for replacing a faulty hard drive.
How to check RAID and file system health using PASM.
Procedure to repair or rebuild a corrupted file system.
Diagnosing and fixing general network connectivity issues.
How to reset the password and resolve Windows Firewall access problems.
Information on how to get help from Promise support.
Instructions for updating the SmartStor firmware and SmartNAVI software.
To Next Page
