Promise Technology SmartStor NS2300N User Manual

SmartStor NS2300N Product Manual
118
RAID 0 – Stripe
When a RAID Volume is striped, the read and write blocks of data are interleaved
between the sectors of multiple disk drives. Performance is increased, since the
workload is balanced between drives or “members” that form the RAID Volume.
Identical drives are recommended for performance as well as data storage
efficiency.
Figure 1. RAID 0 Striping interleaves data across multiple drives
The RAID Volume’s data capacity equals the capacity of the smallest disk drive
times the number of disk drives. For example, a 200 GB and a 300 GB drive will
form a 400 GB RAID Volume instead of 500 GB.
If disk drives of different capacities are used, there will also be unused capacity
on the larger drives.
Because RAID 0 does not offer Fault Tolerance, meaning that you cannot
recover your data after a disk drive failure, Promise does not recommend a
RAID 0 Volume for your SmartStor.
RAID 0 Volumes on SmartStor consist of one or two disk drives.
Data
Stripe
disk drives

Promise Technology SmartStor NS2300N Specifications

General

Brand	Promise Technology
Model	SmartStor NS2300N
Category	Network Hardware
Language	English