SmartStor NS2300N Product Manual
2
Architecture
The SmartStor NS2300N’s architecture is based on the Freescale MPC8313
microprocessor and the Promise PDC20771 Serial ATA RAID Controller. The
Gigabit Ethernet port is used for the data transfer and management. The USB
port is used for a printer, expansion drives, and Uninterruptable Power Supply
(UPS).
Protocol Support
SmartStor NS2300N supports:
• Windows 2000, XP Professional, 2003 Server, and Vista clients through
SMB and CIFS protocols
• UNIX and Linux clients through the NFS protocol
• Macintosh clients through the AFP protocol
• FTP clients through the FTP protocol
• DLNA clients through UPnP protocol with an optional plug-in
• Up to 16 concurrent connections supported
Key Benefits
• Easy-to-use browser-based management interface
• Data sharing over the network
• One-touch backup of designated file folders on client PC
• Network print server with USB printer
• User, Group, and Quota management
• UPS support with automated shutdown
• Heterogeneous environment: Windows, UNIX, Linux, and Macintosh
• SmartNAVI setup and management software
• Promise Advanced Storage Manager (PASM) software
Caution
A Caution informs you of possible equipment damage or loss of
data and how to avoid them.
Warning
A Warning notifies you of probable equipment damage or loss of
data, or the possibility of physical injury, and how to avoid them.
To Next Page
Loading...
Need help?
General
