Chapter 7: Troubleshooting
127
4. On the Recover tab, click the option button beside the invalid RAID Volume.
5. Click the OK button.
The SmartStor will reboot itself to update its configuration and recognize the
RAID Volume.
Checking File System Status in PASM
Typically the first indication of a problem with the SmartStor’s file system is when
your network drive becomes unavailable.
You might also see the message, “File system contains errors. Please check.”
when you click the icons under the File & Print menu.
To view File System status:
1. Start PASM.
See “PASM in your Browser” on page 80.
Or see “PASM in SmartNAVI” on page 81.
2. In the Tree, click the + beside the RAID & File System icon.
3. Click the File System Management icon.
4. Look for the RAID Volume icon on the File System Status tab.
If the RAID Volume icon is Critical (has a yellow !), the file system
contains errors and you must rebuild the file system. See below.
Rebuilding the File System
To rebuild a File System:
1. In the Tree, click the + beside the RAID & File System icon.
2. Click the File System Management icon.
3. In the File System Status tab, click the RAID Volume Critical icon to
display the Rebuild File System button.
Important
Running the Recover function might erase some or all of your
SmartStor settings. If that condition happens, run the NAS Setup
Wizard. See “Setting up the SmartStor” on page 11.
Caution
When you rebuild a File System, you delete all the folders in the
RAID volume and all the data saved in the folders.
To Next Page
Loading...
Need help?
General
