Promise Technology SmartStor NS2300N User Manual

SmartStor NS2300N Product Manual
114
Shutting Down the SmartStor
The only time you need to shut down the SmartStor is to replace the disk drive
cooling fan or the power supply. See “Appendix B: Maintenance” on page 145.
During and after the shutdown, none of your folders will be accessible from your
networked PCs.
Using PASM
To shut down the SmartStor:
1. In the Tree, click the + beside the System icon.
2. Click the Reboot / Shutdown icon.
3. Click the Shutdown option.
4. Click the OK button.
5. In the confirmation box, click the OK button.
Directly
To shut down the SmartStor, press and hold the power button
for five seconds. The system status LED turns red, then goes
dark (right).
Booting the SmartStor After a Shutdown
To restart the SmartStor after a shutdown, press the power
button on the front of the SmartStor chassis (right).
When the SmartStor is fully booted:
• The system status LED turns green (right)
• The buzzer beeps one time (if the buzzer is enabled)
See “Enabling and Disabling the Buzzer” on page 110.
Locating the SmartStor
If your SmartStor in is on a rack with other equipment and you need to locate it
quickly, this function will assist you.
To locate the SmartStor:
1. In the Tree, click the + beside the System icon.
2. Click the System Information icon.
3. Click the System Information tab.
4. Click the Locate button.
The SmartStor’s buzzer beeps three times and the system
status LED blinks three times (right).
System
Status LED
Power
Button
System
Status LED

Promise Technology SmartStor NS2300N Specifications

General

Brand	Promise Technology
Model	SmartStor NS2300N
Category	Network Hardware
Language	English