What to do if my Pronto M61 will not drive?
If your Pronto Wheelchair isn't moving, here's what to check: * Ensure the motor release levers are engaged. * Charge the batteries, making sure the charger setting is correct. * Unplug the charger from the wall outlet before use. * Reset the circuit breaker. If it trips again, contact your dealer for internal repairs.
Why does my Pronto Wheelchair have limited driving distance?
If your Pronto Wheelchair isn't going as far as it should, it could be due to a few reasons. The batteries may not be charged long enough (ensure at least 8 hours of charge time, preferably overnight) or the charger setting might be incorrect. It's also possible the batteries are weak and not holding a charge, in which case they should be replaced.
What to do if the battery indicator flashes low charge immediately after recharging Pronto Wheelchair?
If the battery indicator on your Pronto Wheelchair flashes low immediately after recharging, the batteries may be weak and need replacement. Alternatively, there could be a charger malfunction, or an electrical malfunction. In such cases, consider replacing the charger, or contacting your dealer for support.
What to do if my Pronto M61 Wheelchair batteries are not charging?
If your Pronto Wheelchair batteries aren't charging, try these steps: First, check all connections and secure any loose connections. Try switching to another wall outlet. If these steps don't work, the charger may need replacing, or internal repairs may be required; in such cases, contact your dealer.
What to do if the charger indicator shows low charge immediately after charging Pronto M61 Wheelchair?
If the charger indicator shows a low charge level right after charging your Pronto Wheelchair, the batteries might be weak and need replacement. There could also be an electrical or charger malfunction. In such cases, consider replacing the charger, or contacting your dealer for support.
What to do if my Pronto M61 Wheelchair slows or stops while driving and the Seat Function 1 indicator is lit?
If your Pronto Wheelchair slows down or stops while driving and the Seat Function 1 indicator is lit, it's likely because the elevating seat is raised. Return the seat to its lowest position to resolve this.
Why do the batteries draw excessive current when charging my Pronto M61 Wheelchair?
If the batteries in your Pronto Wheelchair draw excessive current while charging, it may indicate battery failure. Have the batteries checked for a shorted cell and replace them if necessary.
What to do if my Pronto M61 Wheelchair joystick is erratic or doesn't respond as desired?
If the joystick on your Pronto Wheelchair is behaving erratically or not responding as expected, this could be due to an electrical malfunction or the controller being programmed improperly. Contact your dealer for service. You can also try to reprogram the controller, referring to the electronics manual supplied with the wheelchair.
Why does my Pronto Wheelchair motor “chatter” or run irregularly?
If the motor on your Pronto Wheelchair “chatters” or runs irregularly, it is due to an electrical malfunction. Contact your dealer for service.
What to do if only one drive wheel turns on my Pronto Wheelchair?
If only one drive wheel is turning on your Pronto Wheelchair, it could be due to an electrical malfunction or one motor lock being disengaged. Engage the motor lock and contact your dealer for service.
Specific warnings related to the SureStep feature and inclines.
Critical safety warnings for operating the wheelchair, including inclines and obstacles.
Warnings to reduce the risk of unintended movement or brake release due to EMI.
Maintaining stability and balance, including seat positioning strap use.
Warnings and procedures for lifting and moving the wheelchair, especially on stairs.
Procedure and safety warnings for transferring between the wheelchair and other seats.
Importance of weight distribution and safe reaching techniques while moving forward.
Safe practices for reaching and bending backward to avoid tipping.
Initial checks and adjustments for secure and functional operation of the wheelchair.
Guide to diagnose and solve common issues like limited driving distance and charging problems.
Troubleshooting for response issues, power indicator, and seat elevation.
Instructions for powering the wheelchair on and off, and joystick lock mode.
Detailed steps and precautions for controlling the wheelchair with the joystick.
Methods for adjusting the wheelchair's speed using tortoise and hare buttons.
Procedure and safety warnings for operating the elevating seat function.
Instructions for modifying the seat depth using mounting positions.
Procedure for adjusting seat height using spacers and mounting screws.
Guidelines for positioning the seat based on user weight and mounting holes.
Diagrams and table detailing seat positions based on weight and depth.
Instructions on how to engage and disengage motor release levers for freewheeling.
Crucial warnings for safe handling, lifting, and connecting of wheelchair batteries.
Guidance on selecting and orienting batteries with correct terminal configuration.
Procedure for removing and installing batteries from the battery tray.
Detailed steps for disconnecting and removing batteries.
Detailed steps for positioning and connecting new batteries.
Instructions for connecting battery cables, emphasizing color coding and safety.
Critical warnings and precautions for charging the wheelchair batteries.
General| Weight Capacity | 300 lbs |
|---|---|
| Turning Radius | 22" |
| Ground Clearance | 3" |
| Maximum Speed | 6 km/h |
| Battery | 12V 40Ah (2x) |
| Seat Width | 400 mm |
| Seat Depth | 400 mm |
| Overall Width | 620 mm |
| Overall Length | 41" |
To Next Page