Proscend M302-L - Page 59

INDUSTRIAL 4G LTE CELLULAR ROUTER – B_UM V1.1.0
55
(2) Neighbor Configuration
The neighbors sub configuration is used to configure all the BGP routers to peer with and the
maximum neighbors is 16.
(3) Networks Configuration
The networks sub configuration allows to add IP network prefixes that shall be distributed via
BGP in addition to the networks that are redistributed from other sources as defined on the
general sub configuration and the maximum neighbors is 16.
IP Routing > BGP > Neighbor
Item
Description
Neighbor
Mode
Select from Off or On to enable the neighbor setting
IP Address
Set IP address of the peer router
AS Number
Autonomous system number of the peer router
Multihop
Allow multiple hops between this router and the peer router