INDUSTRIAL 4G LTE CELLULAR ROUTER – B_UM V1.1.0
Tip: To manage the L2TP clients under server mode, there are two steps to create the L2TP
client. First, Fill in the Username and Password. Second, Click the Add button.
Select from Off or On to set the client setting.
The authentication method for L2TP connection. Available
options: PAP, CHAP, MS-CHAP, MS-CHAPv2
The virtual IP for L2TP server.
The begin address of L2TP client's IP pool.
The end address of L2TP client's IP pool.
The L2TP client's username. Could be used to add the
newly client or update existed client.
The L2TP client's password. Could be used to add the
newly client or update existed client.
To Next Page
Loading...
