AN-X4-AB-DHRIO (DH+) Page 21
Ethernet Devices Driver
Use this driver for aliased AN-X IP addresses.
Use the following steps to configure the AN-X4-AB-DHRIO (DH+) in RSLinx.
1. Select Communications/Configure Drivers…
2. From the list of Available Driver Types:, select Ethernet devices and click Add New…
3. Give the driver a name
4. For Server’s IP Address or hostname: enter the IP address on the AN-X4-AB-DHRIO (DH+)
and click OK.
5. Check that the driver has status Running
To Next Page
Loading...