Page 46 AN-X4-AB-DHRIO (DH+) Nov 2022
601 Tot 72% [==============
602 Tot 71% [==============
603 Tot 72% [==============
Station Traffic Log
Stn 600
00 21% [====
01 23% [====
37 10% [==
77 16% [===
Stn 601
00 19% [===
01 22% [====
37 13% [==
77 17% [===
Stn 602
00 19% [===
01 20% [====
37 12% [==
77 19% [===
Stn 603
00 20% [====
01 21% [====
37 12% [==
77 18% [===
Response Traffic Log
Rsp 600
00 42% [========
01 22% [====
77 0% [
Rsp 601
00 41% [========
01 24% [====
77 0% [
Rsp 602
00 42% [========
01 22% [====
77 0% [
Rsp 603
00 41% [========
01 24% [====
77 0% [
Even though there are just 4 stations on the network, the network is almost saturated. The total
traffic log shows that the total traffic is over 70%, near the practical maximum of about 75%.
Adding more messages will likely slow down existing traffic.
System Info Log
The System Info Log records informational messages during AN-X startup and normal operation.
This is mostly used by technical support and does not contain information useful to the end user.
View All Logs
Use View All Logs to list and view all the AN-X logs. To view a log file, click on the file name.
Administration Menu
The Administration menu contains items used to configure, control and update the AN-X.
AN-X IP Configuration
Use Administration/AN-X IP Configuration to set the AN-X Ethernet properties.
To Next Page
Loading...
Need help?
General