PROSOURCEFIT Multi-Grip Pull-Up Bar - Door Bracket Mounting Instructions

DOOR BRACKET MOUNTING
INSTRUCTIONS (Optional)
Optionally, you can mount it in a doorway using the mounting instructions below.
If desired, you can mount your ProsourceFit Multi-Grip Pull-Up Bar using the Door
"J" Brackets. It is NOT required.
1.
2.
3.
4.
Center the Door "J" brackets above the back of the doorway. The brackets
should be 13.75 inches apart. Use a pencil to mark the drill holes.
Drill holes using a 1/4 inch drill bit .
Place Wall Anchors A for both brackets.
Use Wall Screw B to attach the rst Door "J" bracket to the wall. Repeat for the
second bracket.