20
Select the Mode for the Occupied period – Press the Warmer or Cooler buttons to choose the mode for the occupied
period. The choices are: Off, Heat only, Cool only and AUTO changeover.
Adjust the Occupied Cool Setpoint – Press the Warmer or Cooler buttons to adjust the Cooling setpoint for comfort.
Adjust the Occupied Heat Setpoint – Press the Warmer or Cooler buttons to adjust the Heating setpoint for comfort.
The following steps determine when the Occupied period(s) will be active.
Enable Occupied 1 – Press the Warmer or Cooler buttons to enable (On) or to disable (Off) Occupied 1 on Monday.
Adjust the Start Time for Occupied 1 – Press the Warmer or Cooler buttons to adjust the start time for
Occupied 1 on Monday.
Adjust the Stop Time for Occupied 1 – Press the Warmer or Cooler buttons to adjust the stop time for
Occupied 1 on Monday.
Upon pressing Mode after the above step; you will be prompted to Save and Exit or Copy this Occupied schedule
to another day.
- To save and exit – Press the Program button.
- To Copy Monday’s settings/schedule to Tuesday – Press Up and then Mode. Press Mode again to copy the Monday
settings/schedule to subsequent days.
- To Program Another Day – Press Down and then press the Mode button to select the day to program.
Repeat the above steps for each day you would like to program.
PSP4272C User Manual.indd 20PSP4272C User Manual.indd 20 6/9/21 11:05 AM6/9/21 11:05 AM
To Next Page
Loading...
Need help?
General
