Prostat OEM Series User Manual

18
User Manual
Time Period Programming
Selecting Your Time Period Schedule (setup step 1) : Press the Setup button
This thermostat may be configured to be programmable or non programmable.
7 Day Program - Allows all seven days to be programmed independently.
Non Program - No advanced time period programming available.
1 Day Program - Allows one 24 hour day to be programmed. This same schedule will be repeated every day the
program is set to run.
5/1/1 Day Program - Allows weekdays, Saturday, and Sunday to be programmed independently.
Selecting Your Available Modes (setup step 2)
Auto-Changeover - Allows the thermostat to turn on heating or cooling based on room temperature demand.
Also allows the manual selection of HEAT only or COOL only and OFF.
Heat and Cool - Allows the thermostat to turn on heating or cooling depending on which one has been manually
selected. Auto-Changeover is not available when this is selected.
Heat Only - Allows the thermostat to only turn on HEAT or OFF modes.
Cool Only - Allows the thermostat to only turn on COOL or OFF modes.
continued next page
How to Change Settings in the Setup Screens
To enter Setup screens, press the SETUP button, then press
MODE. Use the WARMER or COOLER buttons to adjust the value
of your selection. Press MODE to advance to the next setup step.
Press SETUP again to leave the setup screens.
WAR MER
COOLER
MODE
Set
Clock
WAR MER
COOLER
MODE
Set
Clock
PSP4272C User Manual.indd 18PSP4272C User Manual.indd 18 6/9/21 11:05 AM6/9/21 11:05 AM

Prostat OEM Series Specifications

General

Brand	Prostat
Model	OEM Series
Category	Thermostat
Language	English