ProTec Polymer Processing FG 20 Series - Page 28

ProTec Polymer Processing GmbH Foerdergeraet_FG201-FG206_BA_1v0_2018_en
28
Using a PUR hose
1. Clamp the wire spiral with the first clamp (S2) on the front tube (see photo).
2. Attach the hose clamp (S1) for fastening.
Caution!
ONLY flexible hoses may be directly fastened, no rigid tubes,
due to the possible risk of fracture of the plastic nozzles in case
of transverse forces!