ProTec Polymer Processing FG 20 Series - Devices with Automatic Cleaning of the Conveying Air Filter; Dosing Attachment

ProTec Polymer Processing GmbH Foerdergeraet_FG201-FG206_BA_1v0_2018_en
32
Slide the conveying hose on the suction nozzles and fasten with a hose clamp.
For a device with 2K turnout:
Connect the main material on nozzle 1 and the auxiliary material on nozzle 2.
The numbers are adhered over the nozzles.
Push the conveying hose on the interior tube of the suction hose and connect with a conveyor
hose insert made of copper or steel aluminium or ESTS piping through earth clamps with an
earth conductor!
Only convey plastic- granulate with the specified particle size!
If the filter screen is used, the plastic- granulate must be dust-
free!
Otherwise the blower can be damaged.
4.2.5 Devices with automatic cleaning of the conveying air filter / dosing attachment
Connect blower attachment and if necessary the dosing attachment to the compressed air
system:
 Connect compressed air supply line (2).
 Establish compressed air supply.
The compressed air must be free of oil and water!
Otherwise the filter will be gummed up. The filter service life is
then greatly shortened.