To prevent electrical shock, disconnect the instrument
from the power source before cleaning. Use a dry
cloth or one
slightly dampened with water to clean the
external case parts.
Do not open the card cage inside the FIBERSYSTEM
8000, or attempt to
clean it internally.
Using controls or adjustment s or performing
procedures other than those specified in the
documentation supplied with your equipment can
result in hazardous radiation exposure.
This product complies with IEC Pollution Degree 2.
When installing the instrument using power supply, make
sure the detachable power cord is readily identifiable and is
easily reached by the operator.
Do not connect a light source to the optical output or the
connected fiber to prevent potential interferences or
damages of optical or opto-electrical components.
For operation of the instrument use a power supply certified
in compliance with EN54-22 and certified to UL/ULC for
UL/ULC compliance.
Please note, the The Protectowire Company, Inc. AC/DC
adapter A1011A (18V DC, 3.5 A) is not suitable for
certified fire detection application.
The Protectowire Company, Inc.
FIBERSYSTEM 8000 - Linear Heat
Series
To Next Page
Loading...
Need help?
General