Protectowire FiberSystem 8000 User Manual

Getting Started
Laser Safety Information
The laser source specified by this user guide is classified
according to IEC 60825-1 (2007).
The laser source complies with 21 CFR 1040.10 except for
deviations pursuant to Laser Notice No. 50, dated 2001-July-26
1
Max. average output power means the highest possible average
power that the laser source can produce at its output.
Max. permissible average output power is the highest optical
power that is permitted within the appropriate IEC laser class.
2
According to IEC Laser class 1M the laser activity and the laser
power is not dangerous for the user as long as no optical
instruments like magnifying glasses or microscopes are used.
Laser class 1M label
The instrument has built-in safety circuitry, which will disable the
optical output in the case of a fault condition.
The Protectowire Company, Inc.
FIBERSYSTEM 8000 - Linear Heat
Series
11
FIBERSYSTEM
8000 unit
Laser type
Semiconductor
Laser
Wavelength
1064 nm
Max. average output power
1
17 mW
Beam waist diameter
50 µm
Numerical aperture
0.2
Laser class according to IEC 60825-1
(2001)
1M
Max. permissible average output
power
2
20 mW

Protectowire FiberSystem 8000 Specifications

General

Brand	Protectowire
Model	FiberSystem 8000
Category	Controller
Language	English