EasyManua.ls Logo

Protemp PT-70-SS-EU - Assembly Instructions; Carry Handle Assembly

Protemp PT-70-SS-EU
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
WHILE CONNECTED TO A POWER SOURCE
© 2017, Obelis S.A Registered Address:
Bd. Général Wahis, 53, 1030 Brussels, Belgium
Oil Fired Radiant Heater User’s Manual
5
Assembly Instructions
PT-70-SS-EU / PT-70T-SS-EU
What’s In The Box
Carry Handle (1) Black Screws (2)
Carry Handle Assembly
1. Align holes in the upper housing with the 2
holes in the handle as shown in Figure 2.
2. Insert screws and tighten firmly.
Tools Needed:
- Phillips Head Screw Driver
Figure 2
- Remove the heater and all packaging materials
from the shipping carton.
Note: Save the box and packaging materials
for future storage.
Figure 3
Attach the handle while still in the box
for easier unpacking. (See Figure 3)

Related product manuals