W W W . P R O T O P A I N T B A L L . C O M
16
REFLEX RAIL™ BOLT
ASSEMBLY AND MAINTENANCE
009
MAINTENANCE
The basic maintenance for
the REFLEX RAIL™ BOLT is
to clean all surfaces of dirt,
broken paint or other debris,
check for any wear and tear on
the O-rings and change them
if needed, and fi nally applying
a thin coat of DYE Slick Lube
on all surfaces. Before installing
the REFLEX RAIL™ BOLT back
to the REFLEX RAIL™ marker
check that the bolt moves
freely without a lot of friction
and make sure all pieces are
threaded together snugly.
If the REFLEX RAIL™ BOLT is not kept clean and well lubed, you will
either start seeing erratic velocity, leaks or over long period of time,
physical damage to the REFLEX RAIL™ BOLT components.
For troubleshooting leaks and other bolt problems, consult the
troubleshooting section at the end of this manual.
To Next Page
Loading...
