OMPDV288 book Page 26 Thm'sday, June 16, 2005 t0:09 AM
Using the Remote Control
Button Function
Slows down the playback speed of a DVD. Pressing
button repeatedly cycles through the speeds: x1/2, xl/4,
slow x1/8, xl/16, x1/32, and xl,
Note: If a hand icon appears upon pressing a button on the remote, it means
that the button you have pressed does not function in the current
mode or for the disc in the player,
Replacing the Remote Battery
The remote requires a CR2502 battery, which is
held in a small enclosure at the bottom of the
remote.
To replace the battery:
1. Release the tab and pull the enclosure out of
the remote.
2. Remove the old battery and replace it with
the new battery. The positive (+) terminal
should face the bottom of the remote.
3. Slide the enclosure back into the remote.
....
©©
_( REPEAT TITL_
MARK _E×T
SLaW •
26
To Next Page
Loading...
Need help?
General
