202
The values for the DCS Threshold range from 1 to 10. The default value is 5.
Enable/Disable Closed System
[Device-Name]>set wif 3 closedsys <enable/disable>
Shutdown/Resume Wireless Service
[Device-Name]>set wif 3 wssstatus <1 (resume)/2 (shutdown)>
Set Load Balancing Maximum Number of Clients
[Device-Name]>set wif 3 lbmaxclients <1–63>
Set the Multicast Rate (802.11a/b/g)
[Device-Name]>set wif 3 multrate <6, 12, 24
(Mbits/sec)>
Enable/Disable Super Mode (802.11a/g only)
[Device-Name]>set wif 3 supermode <enable/disable>
Enable/Disable Turbo Mode (802.11a/g only)
[Device-Name]>set wif 3 turbo <enable/disable>
NOTE: Super mode must be enabled on the interface before Turbo mode can be enabled.
Configure Antenna Diversity
[Device-Name]>set wif 3 atdiversity <1, 2, 5(auto)> (see below)
[Device-Name]>reboot 0
NOTE: See Antennas for more information on internal and external antenna ports.
Set the Distance Between APs
[Device-Name]>set wif 3 distaps <1–5> (see below)
[Device-Name]>reboot 0
Value Corresponding Antenna Enabled
1 802.11a/b/g (connector 1)
2 802.11a/b/g (connector 2)
5 (auto) Both antennas
To Next Page
Loading...
