Collecting Data
User’s Guide 31
Figure 3-26: Collected Data in ASCII text file
Using Two Prompts
1. Select <F2> from the application menu. The first prompt appears
on the screen.
Figure 3-27: The Item ID Display
2.
Scan the bar code for an inventory item, or use the keypad to
enter the item’s ID number or description.
z
Using a scanner, the code is entered automatically; with a
keypad, press the
<ENTER> key.
Figure 3-28: Enter the Number of Units of Item in Inventory
3.
The second prompt now appears on the first line of the screen,
and the item ID appears on the third line.
4. Enter the number of individual units of the item in inventory.
5. The item number and quantity appear together on the third line
of the screen, separated by a comma, and the first prompt
40-000-00
40-002-00
40-006-00
40-010-00
00-000-17
00-000-19
00-000-02
00-000-11
ITEM ID
¤
F3=REV F4=EXIT
QUANTITY
40-000-00
¤
F3=REV F4=EXIT
PT2000.book Page 31 Thursday, February 26, 2004 9:34 AM
To Next Page
Loading...