PSC PT2000 - Predefined Defaults; Save-And-Exit Settings

Overview
User’s Guide 87
Predefined Defaults : tells how the parameter is set when you select
predefined default D0, D1, or D2 (refer to
page 87).
z Table A-4:, beginning on page 91, lists parameter settings for serial
communications.
Table A-1: Predefined Defaults
Table A-2: Save-and-Exit Settings
Setting ID # Type
Predefined default set 0
D0 Immediate
Predefined default set 1
D1 Immediate
Predefined default set 2
D2 Immediate
Predefined serial defaults
C8 Immediate
Setting ID # Type
Save and exit
EE Immediate
Exit only, no save
EF Immediate
PT2000.book Page 87 Thursday, February 26, 2004 9:34 AM