PSC PT2000 - Code 39; Interleaved 2 of 5; Codabar; Code 93

Programming Parameters
88 PT2000™ & TopGun™
Table A-3: General Programming Parameters
Code Parameter ID # Type Acceptable Input
Predefined Defaults
D0 D1 D2
Code 39 Enter 1 for On and 0 for Off.
Enable
00 On/Off On or Off Off On On
Minimum length
01 Value 00–60 00 00 00
Maximum length
02 Value 00–60 00 60 20
Enable checksum
03 On/Off On or Off Off Off Off
Send checksum
04 On/Off On or Off Off Off Off
Full ASCII mode
05 On/Off On or Off Off On On
Accumulate mode
06 On/Off On or Off Off On Off
Enable AIAG alternate
check digit
07 On/Off On or Off Off Off Off
Interleaved 2 of 5 Enter 1 for On and 0 for Off.
Enable
08 On/Off On or Off Off On On
Minimum length
09 Value 02–60 02 02 06
Maximum length
0A Value 02–60 02 60 10
Enable checksum
0B On/Off On or Off Off Off Off
Send checksum
0C On/Off On or Off Off Off Off
Use lengths 6 and 14 only
(case code)
0D On/Off On or Off Off Off Off
Codabar Enter 1 for On and 0 for Off.
Enable
20 On/Off On or Off Off On On
Minimum length
21 Value 00–60 00 02 04
Maximum length
22 Value 00–60 00 60 20
Send start/stop
23 On/Off On or Off Off Off Off
Convert Codabar to CLSI
24 On/Off On or Off Off Off Off
Code 93 Enter 1 for On and 0 for Off.
Enable
2C On/Off On or Off Off On On
Minimum length
2D Value 00–50 00 01 02
Maximum length
2E Value 01–50 00 50 20
PT2000.book Page 88 Thursday, February 26, 2004 9:34 AM