Using Portable File Transfer Program (PTFER)
User’s Guide 79
The port, baud rate, timeout, and action parameters are optional. If
using one or more parameters, precede them with a hyphen (
-) or a slash
(
/). Enter parameters either before or after the file name.
For example: the command ptfer link.txt /P1 would send the
file named
link.txt over COM1 to the portable (the default action,
T, is assumed). The command ptfer -3r data.txt would upload
data from the portable over COM3 into a file named
data.txt.
The port, baud rate, and position and size settings are saved to and
restored from the initialization file.
PT2000.book Page 79 Thursday, February 26, 2004 9:34 AM
To Next Page
Loading...