7.B. Bluetooth Pairing
Step 1: Enabling Bluetooth in the FluorPen
Switch on the FluorPen (press and hold the SET key).
Scroll to the “Setting” menu (press the MENU key twice,
then press the SET key once).
Select “BT_On” to enable Bluetooth (press the SET key).
* Keep in mind that the FluorPen turns off automatically after about 3
minutes of no action. Turning off the FluorPen
always turns off Bluetooth.
Step 2: Starting the Bluetooth Application on Your PC
Be aware that this description is a general example; some of the steps may be different on your PC.
Select: Start>All Programs>My Bluetooth
Places.
You may also start your Bluetooth application via the Control Panel:
Select: Start>Settings>Control Panel>Bluetooth Devices.
To Next Page
Loading...
