PT200MI instruction manual 16
5.2.19 COMPARISON CONDITION
Transmit Response
[string]<CR><LF> INPUT3 [string]<CR><LF>
Options for [string]
GROSS NET DISPLAY
N<CR><LF> to move to the next setting.
R<CR><LF> to return to normal weighing.
Z.TRACK T=[num]<CF><LF>
YES
Note: When maximum capacity, division or multiplier is changed, the system must be calibrated again
and it is also necessary to reset the Hi/Lo set point, the display of PT200MI will show “CAL1”.
To Next Page
Loading...
