PT PT200MI - Features

PT200MI instruction manual 2
1.3 FEATURES
- Suitable for all strain gauge load cells;
- Clear and stable 13mm, 6 digit LED display;
- Gross weight or net weight can be selected;
- Display step width is selectable in multiples of 1, 2 or 5;
- Numeric display of “O.L.” when maximum capacity is exceeded;
- Display of decimal point is selectable up to 4 decimal places;
- Automatic zero tracking;
- Automatically set tare by push button;
- Delta-sigma conversion method;
- Internal resolution is 16,000,000 counts;
- Scale display resolution from 300 to 10,000;
- Conversion rate up to 200 times/sec;
- Function setting can be performed by software (RS232 option required);
- External on/off switch for function and calibration setting protection;
– Options:
– RS232 input and output port;
– RS485 input and output port;
– HI/LO comparator output (HH, Hi, Lo, LL);
– Parallel BCD output;
or 0~20/4~20 mA analogue output;
or 0~5 V analogue output;
– Optional software:
single material batching control software.