Site Name 1st Line:
Your Storage
*=Left #=Right
Change the first line of the site name for
display on the screen. Use the * and #
keys to move left and right through the
line. When the cursor is on a character, it
can be changed by repeatedly pressing the
corresponding number key until the desired
character appears (similar to the method
used for older cell phones).Each key has
both number and letter functions. A space
is the last character on every key
Below is a list of keys and the characters
they represent in the order they appear:
1: 1QZqz.,
2: 2ABCabc
3: 3DEFdef
4: 4GHIghi
5: 5JKLjkl
6: 6MNOmno
7: 7PRSprs
8: 8TUVtuv
9: 9WXYwxy
0: 0-#*$@’
Site Name 2nd Line: Facility
1=1QZqz., 0=0-#*$@’
*=Left #=Right
Change the second line of the site name
for display on the screen. Use the same
process as above.
Setup Complete
PRESS # WHEN DONE
Message displayed on exit from setup
mode. Press the # key to return the device
to normal operation. If no key is pressed,
the device will return to normal operation
after a few seconds and all information will
be automatically saved.
APEX Access Device
40
114A3863.E rev. 7-2017
To Next Page
Loading...
