Access Response Messages
There are several standard messages built into the APEX to respond
to an access request and the message from the controller varies
depending on the conditions. The following briefly describes the
conditions and the displayed message.
For a valid Entry:
Welcome to
Your Storage
Facility
ENTRY IS GRANTED
For a valid Exit:
THANK YOU FOR USING
Your Storage
Facility
EXIT IS GRANTED
When the area is closed (outside of allowed access hours):
* WE’RE SORRY *
THIS AREA IS
CURRENTLY CLOSED
When the customer is not authorized to enter an area:
* WE’RE SORRY *
YOU ARE NOT ALLOWED
INTO THIS AREA
APEX Access Device
46
114A3863.E rev. 7-2017
To Next Page
Loading...
