System Maintenance
The APEX Access Device requires a minimal amount of maintenance.
However, as with any electronic or mechanical device that is used
regularly, a small amount of maintenance done periodically will
extend the life of the product.
Periodic Visual Inspection
The APEX should be inspected monthly. When performing the
visual inspection, look for the following items:
• Damage caused by contact with vehicles, vandalism, etc.
• Damage caused by water, rain, salt spray, etc.
• Breaks or cracks in the sealant where the keypad mounts to the
gooseneck stand or wall
Periodic Cleaning
The keypad should be cleaned at least twice a year. More frequent
cleaning may be required in harsh environments.
Cleaning the Housing and Touchpad
Inspect and clean the housing and touchpad at least twice per year.
To clean the housing, spray the unit with a mild household
cleaner then wipe it with a soft cloth.
Do not use harsh chemicals, abrasives, or petroleum-based
products as they can damage the finish on the device.
Do not immerse the device in water or use a pressure
washer. A small, soft brush (a toothbrush works well) can be
used to clean between the keys on the touchpad.
APEX Access Device
48
114A3863.E rev. 7-2017
To Next Page
Loading...