0-40001 WEIGHT (DISPLAY) (HI BYTE)
WEIGHT (DISPLAY) (LO BYTE)
STATUS WORD
NEGATIVE =1 / POSITIVE =0
LOADCELL CONNECTION ERROR
CALIBRATION WEIGHT <= LOADCELL CAPACITY
UNLOADED SCALE
CALIBRATION WEIGHT HIGH
VIBRATION ERROR (RESET ISN’T DONE)
WACHDOG ERROR
TARE TAKEN = 1 / TARE LEAVE = 0
TEKE TEMPORARY TARE
VIBRATION ERROR (CALIBRATION ISN’T DONE)
D0 : TEST
( - 65535 ) 0x03-0x04 99999
500 mS
0x03-0x04
0x03-0x04
0x03-0x04-0x06-0x10
D1 : OVERLOAD
D2 : ERROR
D3 : ROL 1
D4 : ROL 2
D6 : INP
D7 : SIGN
D5 : RECESSIONS
D8 : ERROR - 1
D9 : ERROR - 2
D10 : ERROR - 3
D11 : ERROR - 4
D12 : ERROR - 5
D14 : ERROR - 7
D15 : TARE
D13 : ERROR - 6
D0 : RESETTING
D1 : FILLING START
D2 : ERROR RESET
D3 : ZERO CALIBRATION
D4 : SPAN CALIBRATION
D6 : RESETTING CANCEL
D7 : FILLING STOP
D5 : P. CALIBRATION
D8 : TARE TAKE
THE WEIGHT CALIBRATION
THE PARAMETRIC CALIBRATION
RESETTING ON =1 / RESETTING OFF =0 ZER SETUP 1
READ/WRITE
READ
READ
READ
THE WEIGHT CALIBRATION
SET 1 , OUT 1
SET 2 , OUT 2
1-40002
2-40003
CONTROL WORD3-40004
ADRESS
INSTRUCTION
PARAMETER NAME
CLASSIFICATION
ACCESS CASE
BIT INSTRUCTION
FUNCTION
DEFAULT
RANGE
To Next Page
Loading...
Need help?
General