19 pulsar 3
The „Refresh” button refreshes the list of available devices and the „Reset” button sets the default location and
size of the windows.
Warning! The wireless BT transmission is blocked if the USB cable is connected to the charger.
Only 5 chargers may be connected to the computer at the same time.
Menu window
After starting the data transmission, or when the data will be saved to a file, the menu graphic window opens. We
can enlarge the charts (by selecting the area with the left mouse button) and moving it (while holding the button).
By double clicking the chart returns to the size of the window.
Chart description (from top): green line – package voltage curve (V); yellow – voltage increase curve (mV/min);
blue – current curve (A); purple – Ri (internal package resistance); red – temperature curve (°C).
Below: charts, which appear after pressing „B” (Balance) from the symbol toolbar. In the upper part of the window
there are voltage charts for separate cells (only with Am active balancer). It is possible to select and show the
charts of the selected cells (see Voltage comparison window – “S” button).
To Next Page
Loading...
