To Next Page

To Previous Page

Page 41

Remote Communicator

P063 Kiss Required (From Software Revision 6.9.2)

Note* This parameter is direct access only (see page 1).

This parameter determines whether or not an IR remote communicator needs to be

shown to the front of the unit before it can be used. Replaces P089 Kiss Enable.

Options:

0 = No

1 = Yes

P089 Kiss Enable (From Software Revision 6.4.1 to 6.9.1)

The kiss enabled parameter allows the unit to be accessed via a remote infra-red

communicator.

Options:

0 = No

1 = Yes

Default = 1

Pulsar ULTRA TWIN Service Manual

Other manuals for Pulsar ULTRA TWIN