PURE StreamR Splash - Restoring to factory conditions; Factory Reset Process; Updating the software; Software Update Procedure

Restoring to factory conditions
You can restore your StreamR Splash to factory conditions to clear all settings and saved
presets.
Your StreamR Splash needs to be running on battery mode to restore it to factory
conditions.
To restore your StreamR Splash to factory conditions:
1. Disconnect the USB charging cable and switch off the speaker.
2. Press and hold the Bluetooth/Autotune button.
3. While holding down the Bluetooth/Autotune button, switch on the speaker.
4.When Reset is displayed on the screen, release the Bluetooth button.
Do not switch off your StreamR Splash while the restore is in progress. When the restore is
complete, the language selection is shown on the display.
Updating the software
If you are prompted in the app to update the software on your StreamR Splash, plug the
speaker in before starting the update.
While software updates are in progress, ensure your StreamR Splash is plugged in and
charging.
Your StreamR Splash stops playing audio until the update is complete.
StreamR Splash User Guide 17