EasyManua.ls Logo

PurePower PP3600PR - General Recommendations; Fuel Type

PurePower PP3600PR
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
1. If fuel level is low, rell with unleaded automotive gasoline.
2. Check fuel gauge while lling. 
3. When using the generator for the rst time or stopping due to the 
fuel running out, pull the recoil handle several times after lling the 
tank.
GENERAL RECOMMENDATIONS
Purchase gasoline in small quantities and store in clean, approved 
containers.
To minimize gum deposits in your fuel system and to insure easy
starting, do not use gasoline left over from the previous season.
Do not add oil to the gasoline.
Consider adding fuel stabilizer before running or starting the
generator.
FUEL TYPE
For best results use only clean, fresh, unleaded gasoline with an 
octane rating of 87 or higher.
Gasoline/Alcohol Blends
Gasohol (up to 10% ethyl alcohol, 90% unleaded gasoline by 
volume) is approved, as a fuel. Other gasoline/alcohol blends are not 
approved.
Gasoline/Ether Blends
Methyl Tertiary Butyl Ether (MTBE) and unleaded gasoline blends (up
to a maximum of 15% MTBE by volume) are approved as a fuel. Other
gasoline/ether blends are not approved.
Check Component Parts
Check following items before starting engine:
1. Fuel leakage from fuel hose, etc.
2. Bolts and nuts for looseness.
3. Components for damage or breakage.
4. Generator not resting on or against any adjacent wiring.
operation
WARNING
DO NOT overll the tank, leave room for the fuel to 
expand.