EasyManua.ls Logo

PurePower PP3600PR - Transporting; Preparation for Storage

PurePower PP3600PR
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
transporting
TRANSPORTING
When transporting the generator, make sure that the fuel (gasoline) is
drained from the tank.
WARNING
To prevent fuel spillage due to the vibration and
impact, never transport the generator with fuel 
(gasoline) in the tank. Secure the tank cap.
To avoid the risk of the gasoline ammability, never 
leave the generator in an area exposed to direct 
sunlight or high temperatures for a long period time.
Keep the fuel in an approved storage tank when transporting.
1. Turn the engine switch to the STOP position.
2. Drain the fuel from the tank.
3. Tighten the tank cap.
CAUTION
DO NOT place any heavy objects on the generator.
Select and place the generator in the proper position of the transport
vehicle so that the generator will not move or fall down. Secure the 
generator if necessary.
PREPARATION FOR STORAGE
The following procedures should be followed prior to storage of your 
generator for periods of 6 months or longer.
1. Drain fuel from fuel tank carefully by disconnecting the fuel line. 
Gasoline left in the fuel tank will eventually deteriorate making  
engine starting difcult. Add fuel stabilizer to fuel tank.
2. Remove the drain screw of the carburetor to drain fuel.
3. Change engine oil.
4. Check for loose bolts and screws, tighten them if necessary.
5. Clean generator thoroughly with clean cloth.  
NEVER USE WATER TO CLEAN GENERATOR.
6. Pull recoil starter handle until resistance is felt, leaving handle in 
that position.
7. Store generator in a well ventilated, low humidity area.