23
USING ELECTRIC POWER
AC APPLICATION
1. Make sure the voltage indicated on the voltmeter is at the normal
level (approx. 120V).
2. Turn off the switch(es) of the electrical appliance(s) before
connecting to the generator.
3. Insert the plug(s) of the electrical appliance(s) into the receptacle.
• Be sure that the total wattage of all connected appliances does
not exceed the rated output of the generator.
operation
WARNING
Risk of electrocution.
Make sure that the appliance is switched off before
connecting it to the generator.
• DO NOT move the generator while it is running.
WARNING
To take power from the twistlock receptacle, insert the
plug into the receptacle, and turn it clockwise to the
lock position.
• DO NOT put foreign objects into the plug receptacle.
NOTICE
This generator is thoroughly tested and adjusted in the factory. If
the generator does not produce the specied voltage, consult your
nearest authorized service provider.
4. Turn on the switch of the appliance.
To Next Page
Loading...