Purite SELECT HP - 4 About Your Water Purifier; The Select HP Range of Units; Key Components of the Select HP; Touch Screen Display

SELECT HP USER INSTRUCTIONS
Issue: A, part number L300954 11
4 ABOUT YOUR WATER PURIFIER
The Purite Select HP purifies potable water. Water fed into the unit is pumped
through a combination of filtration devices, ionic resin exchange units and
reverse osmosis modules. Purified water produced by the unit complies with
latest standards for laboratory grade water.
4.1 The Select HP range of units
GP: Generation unit (with no close coupled tank).
IT: Generation unit with close coupled 20 litre water storage
tank
GP BP: Generation unit with feed water boost pump
BP/IT: Generation unit with close coupled water storage tank and
feed water boost pump
Each of the above variants is available with 4 different output flow rates:
HP 40 6 litres per hour
HP 80 12 litres per hour
HP 160 24 litres per hour
HP 320 48 litres per hour
Please note that the above outputs are based on an 8 hour working day at
60psi (4 bar) inlet pressure, 25
o
C and maximum of 400 ppm total dissolved
solids.
The unit type is detailed on its serial plate which can be found on the reverse
side of the front cover.
The Select HP is provided with an installation kit for quick installation.
Both media packs are provided and packaged separately.
4.2 Key Components of the Select HP
4.2.2 Touch screen display
Operation of the Select HP is controlled solely through the touch screen
display. System schematics are displayed for easy understanding of the
unit’s process.