What to do if high pressure in Purite Water Filtration Systems?
If you are experiencing high pressure in high pressure variants, it could be due to the feed water inlet pressure being too high or a blockage in the system. Check the feed water supply regulation.
What to do if low pressure in Purite Water Filtration Systems?
If you are experiencing low pressure in low pressure variants, check the feed water supply and the inlet screen.
What to do if LHS pack not fitted in Purite Water Filtration Systems?
Check that the left hand side media pack is correctly located. Push it into position and listen for a click to ensure it is fully located in its retaining block.
What to do if RHS pack not fitted in Purite Water Filtration Systems?
Check that the right hand side media pack is correctly located. Push it into position and listen for a click to ensure it is fully located in its retaining block.
Explains hazard symbols and references used in the manual for safety warnings.
Outlines qualifications and responsibilities for personnel operating the unit.
Provides steps to stop the system in an emergency and upon remedying damage.
Details safety precautions for authorized professionals performing maintenance.
Explains the mimic screen's function, display elements, and button operations.
Details how to access and initiate the cleaning process via the menu.
Describes how to set up audible alarms for various system parameters.
Explains how to set an alarm limit for water quality parameters.
Details how to set an alarm for maximum permissible water temperature.
Explains how to set reminders for replacing consumable items.
Explains how to reset the replacement date for the Puripac media pack.
Details how to reset the replacement date for the Pretreat media pack.
Explains how to reset the replacement date for the filter.
Step-by-step guide for replacing the unit's media packs.
Instructions for cleaning the inlet screen filter of the unit.
Provides recommended cleaning procedures for the unit, including loop and full cleans.
Detailed instructions for replacing the unit's filter.
Offers a guide to diagnose and resolve common system faults and error messages.
General| Bacteria | < 1 CFU/ml |
|---|---|
| Purification Technology | Reverse Osmosis |
| Applications | Laboratory, medical, pharmaceutical, and general use |
| Resistivity | >1 MΩ.cm |
| TOC | < 5 ppb |
| Particles | < 1 particle/ml (>0.2 µm) |
| Stages of Filtration | Pre-filtration, Reverse Osmosis, Deionization, UV Sterilization, Final Filtration |
| Filter Life | 6-12 months (depending on usage) |
| Operating Temperature | 5-35°C |
To Next Page