PUSR USR-G816 - SIM1;SIM2 Configuration

USR-G816 User Manual
pusr.com
1
- 22 -
Table 5. Detail parameters of cellular network
Items
Description
Default
SIM Card Priority
None: Prioritize the use of the sim card used for the last dial-up.
SIM1: Prioritize using SIM1 to dial up and connect to the Internet.
SIM2: Prioritize using SIM2 to dial up and connect to the Internet.
None
Sim Card Switch
Enable: Enable automatic SIM switching.
Disable: Disable automatic SIM switching.
Enable
Trigger Signal
Threshold
If the signal value of the currently used SIM card is lower than the
set value, G816 will automatically switch to another SIM card.
-100dBm
Continue Dial
Failures
When the number of dialing failures reaches this value, switch to
another SIM card and dial again.
2
Link Detection
Enable (Ping
detection)
OFF: Disable the Ping detection.
SIM1: When using SIM1, enable the PING detection.
SIM2: When using SIM2, enable the PING detection.
SIM1&SIM2: Enable the PING detection Whether using SIM1 or SIM2.
SIM1&SIM2
Detection Interval
Interval of PING detection. Unit: s
10
Detection Fail
Number
If the number of PING attempts exceeds this value, it will redial.
4
Detection Address 1
The main destination host of PING detection.
8.8.8.8
Detection Address 2
The alternate destination host of PING detection.
8.26.56.26
4.3.2. SIM1/SIM2 configuration
The settings of SIM1 can be configured on this page. And the SIM2 configuration is the same with SIM1.