PUSR USR-G816 - Access Restrictions

USR-G816 User Manual
pusr.com
1
- 47 -
Enable
Whether to turn on the rule.
Disable
Name
The name of the rule, user defined.
None
Protocol
Specifies to which protocols the rule should apply, including TCP+UDP, TCP,
UDP, ICMP.
TCP+UDP
Source zone
Matches traffic originated from the specified zone.
LAN
Source IP
Mathes traffic originated from specified IP address or network segment.
any
Source port
Mathes traffic originated from specified port number.
None
Destination zone
Mathes traffic originated from specified port number.
wan
Destination IP
Matches traffic destined for the specified IP address or network segment.
None
Destination port
Matches traffic destined for the specified port number.
None
SNAT IP
Changes matched traffic packet source IP address to the value specified in
this field.
None
SNAT port
Changes matched traffic packet source port number to the value specified
in this field.
None
6.4. Access restrictions
Access restrictions implement access restrictions on specified domain names, and support blacklist and
whitelist settings for domain name addresses. When blacklist is selected, devices connected to the router cannot
access the blacklisted domain names, and other domain name addresses can be accessed normally. When the
whitelist is selected, the devices connected to the router can only access the domain names in the white list, and
other domain names cannot be accessed normally. Both the blacklist and the whitelist can be set with multiple
entries, and this function is disabled by default.