PUSR USR-G816 - General Settings; Protocol Selection

USR-G816 User Manual
pusr.com
1
- 51 -
7.1. General settings
7.1.1. Protocol selection
Users can choose the work mode as needed. The “Restarting without data” function is off by default.
Figure 52. General settings of DTU function
If we turn on the “Restarting without data” function, there are two parameters:
Table 18. Parameters of restarting without data
Items
Description
Default
Reconnect Detection
Interval(s)
If the USR-G816 does not receive the data sent by the server for
more than pre-set seconds, it will actively reconnect to the server.
Pre-set value range：1-3600s.
3600 seconds
Restart Detection
Interval(s)
If the USR-G816 does not receive the data sent by the server for
more than pre-set seconds, it will restart.
Pre-set value range：60-36000s.
36000 seconds