Figure 30. Static routing rule
Table 8. Parameters description of static routing
Network interface of the target network.
Destination network address.
A netmask is used to divide an IP address into sub-networks (subnets).
Combined, the 'Netmask' and 'Target' values define the exact destination
network or IP address to which this route applies.
A gateway can be any machine in a network that is capable of serving as an
access point to another network. Traffic that matches this route will be directed
over the IP address specified in this field.
The metric value acts as a measurement of priority. If a packet about to be
routed matches two or more rules, the one with the lower metric is applied.
4.8.2. Routing table
All routing rules are displayed on routing table page.
To Next Page
Loading...