Figure 55. Settings of registration packet
Table 19. Parameter details of registration packet
Master switch of registration packet function.
ON: Enable registration packet function.
OFF: Disable registration packet function.
User-defined: Uses define the registration package content.
ICCID: The registration package content is ICCID information.
IMEI: The registration package content is IMEI information.
USR-Cloud: The registration package content is device ID assigned by
PUSR.
The content of registration packet. Only valid for user-defined registration
packet type. Hex format.
Registry Packet
Contained In
After connection: Send the registration packet information only once after
the socket connection is established.
Prefix of data: Add registration packet information in front of each packet
of data sent by the serial device.
To Next Page
Loading...